JAB DUC 2 60L Direct Unvented S/S Cylinder
The JAB DUC 2 60L Direct Unvented Cylinder is a compact, reliable hot water storage solution designed for smaller properties, point-of-use applications, or areas with limited space.
With its direct electric heating system and durable construction, it delivers efficient, pressurised hot water where and when it's needed.
Designed with installation in mind, allowing most existing airing cupboards to be used. The ideal choice for the replacement of standard copper cylinders.
Applications
- Small Flats, Studios, or single point use (like offices, workshops, or annexes)
- Typical use: 1 person, 1 sink + 1 Shower.
- Point-of-use applications, such as offices, workshops, or outbuildings
- Properties without a central heating system
- Backup or supplementary hot water storage alongside other systems.
Key Features & Benefits
- 60-Litre Capacity - Perfect for small homes, flats, or single-use outlets
- Direct Heating - Fitted with an immersion heater to heat the stored water directly, making it independent of a boiler
- Unvented System - Provides mains-pressure hot water for improved flow rates to taps, and showers
- Compact Design - Space-saving cylinder ideal for cupboards, lofts, or utility rooms
- Durable Build - Manufactured from high-quality, corrosion-resistant materials for long-lasting performance.
- Efficient Insulation - factory-applied foam insulation reduces heat loss and energy use
- Safe and Reliable - Built-in safety controls, thermostatic regulation, and pressure relief for peace of mind
- Simple Installation - Straightforward to set up with minimal maintenance requirements.
- 25-Year Warranty - Including One Year On-Site Warranty
- U.K. Manufactured
How it works
Being a direct cylinder, the JAB DUC 2 60L uses an immersion heater to heat the water stored inside. Connected to the mains supply, it delivers pressurised hot water directly to taps and showers without the need for a cold water tank. This makes it an excellent choice for properties without a central heating boiler or where additional hot water storage is required.
The unvented design means water is supplied at mains pressure, offering a more powerful flow compared to traditional vented cylinders.
Specifications
| Product Code | JD2060D |
| Nominal Capacity (L) | 60 |
All direct units are supplied with:
- 2 x 3kw 240v s/p Immersion Heaters
- 1- Expansion Vessel
- 1 x T & P Relief Valve
- 1 x 3 bar Inlet Chain
Why Choose the JAB DUC 2 60L Direct Unvented Cylinder?
Compact yet powerful, the JAB DUC 2 60L is the perfect solution for delivering mains-pressure hot water in smaller spaces. With its efficient direct electric heating, robust safety features, and easy installation, it provides long-term reliability and convenience for both homeowners and installers.
Specifications
| Product Ref | HWS |
|---|---|
| Volume (litres) | 60 |
| Lead time (working days) | 7 |
Delivery Terms
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
- No documents available for this product.
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.