- Diesel
- Gas Oil
- Heating Oil
- HVO
- Bunded
- Slimline
Estimate delivery costs
Your postcode lets us show accurate delivery costs before you add to basket. We use it only to calculate shipping rates — it isn't stored or shared.
Couldn't load pickup availability
Enquire about
Loading form…
FTS1000 1000 Litre Bunded Heating Oil Tank
Product Overview
The FTS1000BT 1000 Litre Bunded Oil Tank is a slimline, double-skinned plastic storage tank designed for the safe storage of heating oil, diesel, gas oil and HVO. With a 1,000 litre capacity and compact footprint, it provides a practical storage solution for domestic, agricultural and commercial applications where reliable fuel storage is required.
Manufactured from high-grade polyethylene, the FTS1000BT is corrosion resistant, high-impact and UV stabilised. The tank incorporates an internal steel frame to provide additional support and strength, while the double-skinned construction provides secondary containment around the primary storage tank.
Key Features
- 1,000 litre storage capacity
- Approx. 220 gallon capacity
- Bunded double-skin construction
- Slimline design
- High-grade polyethylene construction
- British made
- Corrosion resistant
- High impact strength
- UV stabilised
- Internal steel frame for additional support
- 4" inspection screw lid
- 2" vent
- 1" BSP bottom outlet
- Lockable manhole cover
- Suitable for diesel, gas oil, heating oil and HVO
- Green finish
- Suitable for domestic, agricultural and commercial fuel storage
- 10 Year Warranty
Bunded Double-Skin Construction
The FTS1000BT features a bunded, tank-within-a-tank construction. The inner tank provides the primary fuel storage, while the outer tank acts as secondary containment in the event of a leak or spill.
This double-skinned design provides an additional layer of protection around the stored fuel and helps contain any surplus fuel within the outer tank rather than allowing it to escape beyond the tank itself.
High-Grade Polyethylene Construction
The tank is manufactured from high-grade polyethylene and is British made. The material is designed to provide corrosion resistance, high impact strength and UV stabilisation, making the FTS1000BT suitable for outdoor fuel storage applications.
An internal steel frame is also incorporated into the tank to provide additional structural support and strength.
Applications
The FTS1000BT can be used for a variety of fuel storage applications where a 1,000 litre bunded tank is required.
Typical applications include:
- Domestic heating oil storage
- Agricultural fuel storage
- Commercial properties
- Workshops and depots
- Farms and agricultural premises
- Diesel and gas oil storage
- HVO storage
- General fuel storage applications
Its slimline dimensions make it particularly useful where available installation space is limited.
Delivery
Standard tank deliveries are made on a kerbside basis, meaning the tank is delivered to the kerb and is not positioned further into the property.
For the FTS1000BT, Fuel Tank Shop states that its standard delivery service can lower the tank to ground level to assist with unloading. Alternative delivery arrangements, including HIAB delivery, may be available by request and can incur an additional charge.
Customers should ensure that suitable access is available for the delivery vehicle and that the intended installation location is prepared before delivery.
Specifications
| Product Ref | FTS |
|---|---|
| Volume (litres) | 1,000 |
| Length (mm) | 1,960 |
| Width (mm) | 635 |
| Height (mm) | 1,382 |
| Weight (kg) | 116 |
| Footprint (L+W) | 1810mm x 605mm |
| Lead time (working days) | 7 |
Delivery Terms
Estimated Leadtime is 2/3 Working Days. (Scottish highland postcodes may experience longer lead times)
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
What is a bunded tank?
Installation requirements
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
New customer offer
£25
off your first order
Minimum spend £500. One code per customer.
Join our mailing list
We'll email your discount code, plus stock updates and trade offers.
We use your email to send your discount code and marketing emails you've opted into. See our privacy policy for how we handle your data.
You're on the list
Check your inbox — your code is on its way. Add us to your safe senders so it doesn't land in spam.