- Non Potable Water
Estimate delivery costs
Your postcode lets us show accurate delivery costs before you add to basket. We use it only to calculate shipping rates — it isn't stored or shared.
Couldn't load pickup availability
2000 Litre Water EU Highway Bowser
2000 litre water EU bowser is fully approved for towing on the road and has unrivalled off road capabilities.
Technical Specifications:-
CHASSIS:
- Constructed from 5mm pressed steel section fully welded with a front standing plate and 100 x 50 RSC ‘A’ frame drawbar.
AXLE/SUSPENSION:
- Single Knott-Avonride 3000kg torsion beam axle fitted with 300 x 60 auto reverse brakes.
WHEELS AND TYRES:
- 2 no. 235 /85 x 16 x 12 ply radial tyres on 5 stud 61/2” pcd rims.
COUPLING:
- Knott-Avonride 3000kg capacity posibrake over run auto reverse coupling c/w breakaway cable, spring assisted handbrake lever, fitted with 40mm eye or 50mm ball.
TANK:
- Trailer Engineering's 2000 litre water EU highway bowser uses a polyethylene moulded tank, elliptical in section, with internal anti surge baffle & fitted with a 22” lockable outer hinged manlid cover, inner sealed vented manlid. 2” front draw off, 2 rear outlet connections.Tank secured to chassis with 2 stainless steel straps.
ANCILLARY EQUIPMENT:
- Our 2000 litre water EU highway bowser comes with moulded mudguards, mud flaps,front telescopic jockey wheel, Side reflectors, & front markers, full road lighting c/w 13 pin plug and 7 pin adapter.
Specifications
| Product Ref | TE |
|---|---|
| Volume (litres) | 2,000 |
| Length (mm) | 3,555 |
| Width (mm) | 1,550 |
| Height (mm) | 1,524 |
| Weight (kg) | 476 |
| Lead time (working days) | 25 |
Delivery Terms
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.