SpinSecure Versalock Oil Tank Fill Point Lock
Spinsecure Versalock Tank Lock is a fuel tank locking device that will fit to a standard 2' fill point inlet on an oil tank to secure its contents.
** Please ensure that the filling point thread on the tank is 100% clean and free from contaminants, as it will cause the thread to seize and can potentially lock the spin secure into place. **
Its clever design utilises Spin Secure technology in that when the cap is locked it spins freely and is almost impossible to remove.
Most existing locking caps are supplied in two pieces and are often secured in place using low quality padlocks which can easily be removed or broken.
Tank Lock eliminates this problem due to its one piece padlock free design and as a result there are NO torque points for forced entry using crow bars, ensuring your tank contents are as safe and secure as possible.
Male or Female?
If the fill point is protruding then this will be a male thread which is standard on most tanks, however, if the thread is internal and recessed, then that would be a female connection and the cap suitable for female threads will be required. (Not supplied).
Features:
- Does not require a padlock
- Eliminates 'crow-bar' access
- For use on 2' MALE threads
- Machined from a non-ferrous hard Zinc Alloy
- Rubber gasket seal to prevent leaks
- High security numbered lock with over 50,000 combinations
- Complete with 2 keys
- Multiple key configurations available
- Weatherproof 'o'-ring sealed self-closing cover
- Integrated safety thermal relief
- No sealants or adhesive required
- No installation tools required
**Please note: Some of the spinsecure locks may have 'Versalock' on them. They are still manufactured by Spinsecure and you will receive a Spinsecure manufactured product**
Specifications
| Product Ref | CT |
|---|---|
| Lead time (working days) | 3 |
Delivery Terms
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
- No documents available for this product.
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.