Piusi Ocio Fuel Tank Gauge
The Piusi Ocio Fuel Tank Gauge is a continuous reading, digital tank level monitoring device for use on tanks up to 4 metres high. The Piusi fuel tank level gauge detects the static pressure generated by the fluid height using a flexible capillary which is inserted into the tank. Once calibrated using the tank measurements, these fuel tank gauges illustrate the level reading either in mm, litres or percentage depending on the user’s preference. There is also an alert function which can be set by the user to warn of possible high and low level statuses. A 4-20ma model is also available for use with building management systems. These fuel tank contents gauges are also available in a version specifically for the use with AdBlue™ or DEF as it is referred to in America, and there is a kit available to make the standard Ocio compatible with oil.
- Digital fuel tank level indicator
- Tank probe with 10 metres capillary
- For tanks between 600-4000mm high
- High/low level statuses can be set up
- Suitable for diesel, water, windscreen, or urea (depending on model)
- IP55 Rated
- %, litre and mm readings
- ½” M BSP balance chamber fitting
- Accuracy +/- 1%
- Supplied with two relays for connection to other equipment
- Oil kit available to add to standard Ocio
- Optional advanced software available
Please note: Piusi is Italian made and therefore supplied with a 2 pin European plug (Euro plug). You will either need to change the plug for a UK 3 pin plug or utilise an adaptor.
Suitable for Diesel and Water
Specifications
| Product Ref | CT |
|---|---|
| Lead time (working days) | 3 |
Delivery Terms
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.