Piusi 3000 Supreme Smart Diesel Transfer Pump
The Piusi 3000 Supreme pump is an intelligent running and secure version of the BP3000 diesel transfer pump. With duel 12v & 24v capabilities it makes this transfer pump the ideal mobile unit.
The PIUSI smart pump will only turn on and dispense fuel to authorised smartphone app holders, which secures the fuel when a site is left unattended or out of hours. This will give you the ability to record dispensing data including quantity of fuel taken, and date and time, this refuelling pump provides a greater handle on how your fuel is being used and help to spot anomalies.
The Piusi 3000 Supreme intelligent pump manages its own operation to save time and eliminate causes of pump failure often associated with mobile tanks. Users and managers can pre-set the number of litres to dispense, reduce flow rate for filling jerry cans. The diesel transfer pump will automatically stop running if your tank runs out of fuel to protect itself from dry run damage. The pump can slow its own motor down to prevent overheating, allowing it to be continuously run unlike other battery powered models.
As standard the Supreme pump can have 2 users and stores the last 20 transactions on the app. You can upgrade this to the PRO version which will enable you to have 10 users and the last 100 transactions can be stored on the app or can be downloaded to CSV file.
Multiple Piusi 3000 Supreme pumps can be integrated with the Piusi B.SMART cloud based fuel management software, meaning you can monitor mobile fuel tanks across unlimited sites remotely through a single online portal. This also allows up to 500 users and unlimited transactions to be stored and downloaded to CSV file.
Product Features:
- 12v & 24v duel capability
- Run delay.
- Secure dispensing via smartphone app
- Monitor mobile fuel tanks across unlimited sites remotely.
- Slow motor down automatically to prevent overheating.
- Cast iron pump body with anti-corrosion paint.
- IP55 rated.
- Supplied with 4m cable & clips.
- Direct current brush motor with permanent magnet stator
- Pre-set dispensing
- Reduce flow rate for filling jerry cans.
- Sintered steel rotor and acetal resin vanes
- Incorporated bypass valve
Specifications
| Product Ref | CT |
|---|---|
| Lead time (working days) | 3 |
Delivery Terms
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.