PRODUCT REF · TM4790
Oil Tank Sight Gauge - Atkinson Tankmaster
Oil Tank Sight Gauge - Atkinson Tankmaster
Estimate delivery costs
Your postcode lets us show accurate delivery costs before you add to basket. We use it only to calculate shipping rates — it isn't stored or shared.
Couldn't load pickup availability
Oil Tank Sight Gauge - Atkinson Tankmaster Valve 4-in-1 Sight Gauge
Basic visual sight gauge for single skin oil tanks with an integral oil filter, shut off valve & fire valve. Choice of sight gauge sizes to suit most tanks (4ft 6" to 10ft).
Manual 4-in-1 level gauge for single skin tanks:
1 - Control valve to turn on/off oil supply
2 - Pull to read valve/sight tube allows inspection of tank contents level
3 - Integral filter to ensure only clean oil is allowed to pass from the tank
4 - Self-closing hand wheel isolates oil supply in case of fire near the tank;
Atkinson Tankmaster Features
- PVC Sight Gauge
- Pull-To-Read valve to isolate flow into tube during rest
- On/Off Handwheel
- Eutectic Solder Fire valve built into handwheel
- 10mm Brass Compression fitting outlet
- 52 Micron Nylon Filter (Replaceable)
- Reversible body for left or right-hand exit of compression fitting
- Stand-off Clip for mounting top of tube to top of tank
- 1/2" BSP Male Tank Fitting (if fitting to a 1" outlet, you will need an extension piece - see below)
- Mounting kit, for top of sight tube
- Full instructions
Tankmaster Adaptor (Extension Pieces)
- Required for fitting to 1" BSP outlets (as Tankmaster body is 1/2")
- Required for plastic tanks (when fitting to a plastic tank, the outlet will be recessed - you will require an extension fitting to ensure the Atkinson Tankmaster Valve does not foul the end of the tank and prevent installation)
- Available in 1", 3 1/2", 6 1/4" and 7 1/4" (1" BSP Male Tank fitting/lock-nut at one end and 1/2" BSP Female at the other end - select your required length from the options)
Tip: Sight Gauges should not be fitted to bunded tanks; however, they may be used on any single skinned tank or in any area that is protected by a bund.
Specifications
| Product Ref | ATK |
|---|---|
| Lead time (working days) | 3 |
Delivery Terms
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.