
Oil Line Inspection Chamber – 315mm Diameter
When installing underground heating oil pipework, ensuring that pipe joints remain accessible is an important consideration. The 315mm Oil Line Inspection Chamber provides a convenient access point for buried oil pipe connections, helping make future inspections and maintenance easier.
Designed for use with both 10mm and 15mm oil supply pipes, this inspection chamber is particularly useful where an underground pipe joint cannot be avoided. Rather than leaving connections permanently buried, the chamber creates an accessible space around the joint, allowing it to be located and inspected when required.
Adjustable Design for Different Installation Depths
Supplied with three stacking riser sections and a top lid, this modular inspection chamber can be assembled to suit different ground depths. When all three risers are fitted, the chamber provides a maximum build-up depth of approximately 450mm.
For existing oil pipework installed at a shallower depth, one or more risers can be removed to achieve a suitable installation height. This flexibility makes it a practical choice for both new oil line installations and upgrades to existing underground pipework.
The 315mm diameter provides a dedicated access area around the pipe connection, while the textured lid is designed to finish level with the surrounding ground for a tidy, discreet appearance.
Why Choose This Oil Pipe Inspection Chamber?
-
Accessible pipe connections: Provides access to underground oil line joints for inspection and maintenance.
-
Suitable for 10mm and 15mm pipework: Compatible with common domestic heating oil supply line sizes.
-
Adjustable installation depth: Three stacking risers allow a build-up of up to 450mm.
-
Suitable for existing installations: Individual risers can be removed to accommodate shallower buried pipework.
-
Practical modular construction: Supplied with separate riser sections and a top lid.
-
Neat ground-level finish: Textured lid designed to sit flush with the finished surface.
What Is Included?
-
1 x Inspection chamber lid and top section
-
3 x Stacking riser sections
Installation Considerations
The inspection chamber should be positioned around the underground oil pipe joint, with suitable access maintained from ground level.
The bottom riser can be notched to accommodate the incoming and outgoing oil pipes. The remaining risers are then stacked to achieve the required depth, with the lid fitted on top and finished level with the surrounding ground.
Where possible, underground oil pipe joints should be avoided. Where a joint is necessary, follow the relevant OFTEC guidance and applicable installation requirements to ensure the connection remains accessible.
Specifications
| Product Ref | OTM |
|---|---|
| Lead time (working days) | 4 |
Delivery Terms
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
- No documents available for this product.
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
