Estimate delivery costs
Your postcode lets us show accurate delivery costs before you add to basket. We use it only to calculate shipping rates — it isn't stored or shared.
Couldn't load pickup availability
Megaflo Eco 170i 2 Indirect Cylinder
Heatrae Sadia Megaflo are the market leaders in Hot Water Cylinders. The internal expansion system keeps external pipework to a minimum, removing the need for a separate expansion vessel. UK designed, engineered and manufactured, to exacting detail and from Duplex stainless steel. 100% pressure tested to 1.6MPa (16 bar) The unit is supplied complete with all the necessary safety and control devices needed to allow connection to the cold water mains. All these components are preset. High corrosion resistance for long life
Package Includes:
- Internal expansion system with floating baffle
- Long life back-up immersion heater
- Robust handle for safe, easy manoeuvring
- Neat appearance and space-saving design
- Insulated T&P valve
- 60mm thick cylinder insulation
- High grade duplex stainless steel
- Large surface heat exchanger improves heat-up and recovery time
- Delivers up to 76 l/m litres of hot water per minute (3 bar pressure)
- High strength to weight ratio
- Designed to heat as much water as possible over the shortest period of time
- Superb hot water performance, even at low pressures – no need for shower pumps or tanks
- Max flow at 3 bar: 76 l/min
- Max flow at 1 bar: 45L/min
- Weight when empty: 43kg
- Weight when full: 220kg
- 30-year warranty on the inner tank and 2-year warranty on all other components
Specifications
| Product Ref | PF |
|---|---|
| Length (mm) | 600 |
| Width (mm) | 579 |
| Height (mm) | 1,384 |
| Lead time (working days) | 7 |
Delivery Terms
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.