JAB DUC 2 90L Indirect Unvented S/S Cylinder
The JAB DUC 2 90L Indirect Unvented Stainless Steel Cylinder is a high-performance domestic hot water storage cylinder designed to deliver reliable, mains-pressure hot water to taps, showers, and appliances throughout the home.
Constructed from high-grade duplex stainless steel for durability and corrosion resistance, the DUC 2 90 provides long service life with minimal maintenance. Its compact 90-Litre capacity makes it ideal for smaller homes, apartments, and en-suite systems, while the unvented design eliminates the need for a cold-water storage tank - freeing up valuable loft space and providing powerful water pressure at every outlet.
This indirect model is designed to be heated by a gas or oil boiler, with an additional immersion heater connection for backup or off-peak heating.
Designed with installation in mind, allowing most existing airing cupboards to be used. The ideal choice for the replacement of standard copper cylinders.
Applications
- Domestic and light commercial properties
- Properties seeking mains-pressure hot water without loft tanks
- Homes using a gas or oil boiler for water heating
- Modernisation or replacement of traditional vented systems
- En-Suite bathrooms or low-profile hot water installations
- Ideal for properties with limited space
- Typical use: 1-Bedroom flats or small apartments with 1 bathroom.
Key Features & Benefits
- 90-Litre Capacity - 90-litre stainless stel unvented cylinder
- Indirect coil for boiler connection
- Factory-Fitted high-performance installation
- Factory tested to meet G3 Building Regulations
- High-Pressure Performance- Delivers strong, consistent mains-pressure hot water
- Compact Design - Space-saving cylinder ideal for cupboards, lofts, or utility rooms
- Efficient heating - Fast heat recovery from connected boilers
- Durable Stainless Steel Build - Corrosion-resistant for long service life
- No Cold-Water Tank Required - Saves loft space and simplifies installation
- Energy-Efficient - Advanced insulation reduces heat loss and energy costs
- Compliant and Safe - Supplied with all safety controls and G3 Certification
- 25-Year Warranty - Including One Year On-Site Warranty
- U.K. Manufactured
How it works
- Colds Mains Supply: The cylinder takes in cold water directly from the mains supply
- Primary Heating: The indirect coil inside the cylinder is heated by your central heating boiler, transferring heat to the stored water
- Hot Water Storage: The heated water is stored in the stainless-steel vessel, ready for use
- Backup Heating: An immersion heater can be used as an alternative or secondary heat source
- Mains Pressure Delivery: Hot water is supplied to outlets at mains pressure, ensuring strong flow rates and consistent temperature.
Specifications
| Product Code | JD2090i |
| Nominal Capacity (L) | 90 |
| Height (mm) | 750 |
| Diameter Ø (mm) | 510 |
| Empty Weight (kg) | 32 |
| Full Weight (kg) | 121 |
| Standing Heat Loss (kWh/24h) | 1.59 |
| Reheat Time from 10°C to 60°C | 26 |
| Actual Capacity (L) | 89 |
| Standing Loss (W) | 66 |
| Energy Efficiency Class of Model | C |
| Operating Pressure (bar) | 3 |
| Immersion Heater Rating | 3kW 240v |
| Max Incoming Supply pressure (bar) | 12 |
All indirect units are supplied with:
- 1 x Dual Stat. And high Limit Stat
- 1 x 3kW 240v s/p Immersion heater
- 1 x Expansion Vessel
- 1 x T & P Relief Valve
- 1 x 3 bar Inlet Chain
- 1 x Two Port Motorised Valve
* Please note, the image is for visual purposes only and may be slightly different upon arrival
Specifications
| Product Ref | HWS |
|---|---|
| Volume (litres) | 90 |
| Lead time (working days) | 7 |
Delivery Terms
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.