IBC Electric Diesel Transfer Pump Kit
The IBC Electric Diesel Transfer Pump Kit is a specially designed plated unit for transferring diesel that is stored in an IBC. Comprising of a Piusi Panther 56 diesel fuel transfer pump, automatic fuel nozzle and delivery hose, this kit is a ready to use dispensing solution. There are two models of this IBC refuelling pump available; one with, and one without a diesel flow meter, depending upon the user's requirement for measuring the amount of fuel that has been transferred.
To make these diesel dispensing pump units as flexible in their installation as possible, this kit is supplied without the suction connections. There is the choice to add either an optional bottom or top suction hose kit as an accessory depending upon your IBC connection.
Specification:
- Piusi Panther 56 Electric Fuel Transfer Pump
- Mild steel IBC pump plate
- Max flow rate: 56ltr per min (depending on model)
- Automatic nozzle
- Optional Piusi K33 fuel flow meter
- 4m delivery hose
- 230v
Optional Extras
- Flow Meter
- Suction Kit to fit to Top or Bottom Outlet IBC's
- Top suction kit comprises 1" connector for pump, suction hose and foot valve. This does not connect to the red IBC cap.
- Bottom suction kit is 60x6
Image showing pump and IBC for illustrative purposes
Please note for 240v versions: Piusi is Italian made and therefore supplied with a 2 pin European plug (Europlug). You will either need to change the plug for a UK 3 pin plug or utilise an adaptor.
Specifications
| Product Ref | CT |
|---|---|
| Lead time (working days) | 3 |
Delivery Terms
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
- No documents available for this product.
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.