PRODUCT REF · X01410HO/200ML
Exocet Premium Heating Oil Additives - 200ML
Exocet Premium Heating Oil Additives - 200ML
Estimate delivery costs
Your postcode lets us show accurate delivery costs before you add to basket. We use it only to calculate shipping rates — it isn't stored or shared.
Couldn't load pickup availability
Exocet Premium Heating Oil Additive - 200ml
The Exocet Oil Addtive is an additive used for domestic kerosene (BS2869:C2) that can be used to create a premium grade fuel. It is available with the inclusion of fragrance for use in environments sensitive to fuel odours or where sensory evidence of the premium fuel needs to be demonstrated.
This multi-component product guards against fuel degradation, the corrosion of metal storage tanks and associated pipework, the adverse effects of fuel interaction with copper containing fittings and pipework and serves to inhibit the build of deposits in storage tanks.
Features:
- Lowers carbon emissions
- Stabilises fuel – increases its shelf life
- Inhibits sludge formation
- Reduces deposit build up around nozzles and on heat exchanger surfaces
- Reduces service problems Improves system efficiency
Usage
- Fuel filters plug
- Burner jets foul quickly
- Excessive soot deposits in the heat exchange chamber
-
100ml
- Fuel treated in litres: 500
-
200ml
- Fuel treated in litres: 1000
Benefits:
- Cleaning
‘Clean up’ and ‘keep clean’ are at the root of the majority of our multifunctional packages for both open flame and internal combustion system enhancement. But ‘cleaning’ encompasses much more and exocet® problem solving products used in conjunction with our fuel preservation and tank cleaning products an all round fuel ‘polishing’ effect can be achieved.
- Economy
Fuel economy in any system and in any equipment is largely achieved by maintaining that equipment at ‘factory settings’ or at its design parameters. Fuel additives that slow down or even stop the rate at which equipment ‘gets dirty’ or ‘fouls up’; all aid fuel economy. This may also be achieved by proper maintenance of the fuel in storage or by affecting its behaviour within the equipment.
- Maintenance
exocet® fuel additive products used for maintenance are diverse, ranging for the one off rapid injector cleaning additives to fuel soluble biocides as well as tank cleaning and associated products.
- Performance
‘Performance’, when attached to fuel, often conjures images of ‘faster’, ‘more powerful’ or ‘more economical’ and all of these can be achieved with the appropriate fuel additives. Fuel additives can also impact on fuel in storage, the handling properties of fuel and on the harmful effects the fuel itself can have on components within the fuel system both before and after the combustion process.
Specifications
| Product Ref | X01410HO |
|---|---|
| Lead time (working days) | 4 |
Delivery Terms
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
- No documents available for this product.
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.