
Description
Aztecs AGRITEC Suto 10W-30 Agricultural Tractor Oil
The AGRITEC SUTO 10W-30 is a modern Super-Universal Tractor Oil (SUTO) engineered as a single-fluid solution for today's mixed agricultural fleets.
It's formulated to lubricate diesel (and some petrol) engines, transmissions, hydraulics and oil-immersed (wet) brake systems - delivering dependable protection, smooth shifting and reduced inventory complexity for farms and contractors.
Recommended Applications
- Tractors: (engine + gearbox + final Drive + wet brakes) - ideal for older and many modern tractors that permit a super-universal oil
- Combine Harvesters, Balers, Telehandlers, Loaders: Where one oil must protect engines, hydraulics and transmissions
- Small Agricultural Implements: with shared-lubrication circuits
- Mixed On-Farm Fleets: Where simplifying lubricants saves time and reduces stocking different fluids
- Performance Levels: ACEA E3 API (Engine) SF/CG-4 API (Transmission) GL-4 Allison C4 Case MS 1204/1206 Case New Holland MAT 3525 Caterpillar TO-2 Ford M2C134-D, M2C159-B/C John Deere J27, J20C MAN 271 Massey Ferguson M1135, M1139, M1143, M1144, M1145 New Holland 410B Mercedes-Benz 228.1 ZF TE-ML 06B, 06C, 07B, 07D
Key Benefits
- True 4-in-1 Performance: Lubricates engine, gearbox, hydraulic systems and wet brakes so you can carry fewer products
- Cold-Start Friendliness: 10W cold rating improves circulation on start-up vs thicker SUTO grades, reducing wear during morning starts
- Smooth Wet-Brake Performance: Friction modifiers reduce brake 'Squawk' and chatter common in oil-immersed brakes
- Wear and Deposit Control: Detergent and anti-wear additives keep piston crowns, gears and pumps cleaner for longer service life
- Good Thermal Stability: Resists oxidation and viscosity breakdown under heavy hydraulic and transmission loads
- Inventory Efficiency: One oil that covers multiple systems, lowering ordering and storage complexity
Typical Test Data
| Parameter | Typical Value |
| Density @ 15°C (ASTM D4062) | 0.868 g/cm³ |
| Flash Point (ASTM D92) | 190°C |
| Kinematic Viscosity @ 40°C (ASTM D445) | 70 mmª/s |
| Kinematic Viscosity @ 100°C (ASTM D445) | 10.8 mmª/s |
| Pour Point (ASTM D97) | -35°C |
| Viscosity Index (ASTM D2270) | 144 |
Please note: These are typical values and do not constitute a specification. Actual Performance may vary.
custom.video_short_code
- Choosing a selection results in a full page refresh.
- Opens in a new window.
