Skip to product information
1 of 2

PRODUCT REF · 950ROAD-Hand

950 Litre Highway Diesel Bowser

950 Litre Highway Diesel Bowser

  • Diesel
  • Gas Oil
  • HVO
  • Steel
  • Bunded
  • Customer Off Loading
Volume950 L
Weight476 kg
L · W · H (mm)3555 × 1550 × 1524
from £5,565.75£6,678.90
ex. VAT inc. VAT £6,678.90 inc. VAT £5,565.75 ex. VAT
Regular price £5,565.75 GBP
Regular price £0.00 GBP Sale price £5,565.75 GBP
Sale Sold out
Dispatches in approx. 2 weeksPrice match guarantee
Choose Pump

Estimate delivery costs

Free delivery Over £500 · UK mainland orders
Manufacturer warranty Up to 10 years on selected tanks
OFTEC certified With installation service
0% finance available Trade accounts welcome
View full details

950 Litre Bunded Diesel Bowser - Highway Bowser

950 litre (208 gallons) road towable bunded diesel bowser. Certified UN 1202 (For Road Haulage).

Like to view the bowser ? Please click on the video tab below for a walk around showing the design & features of this bowser

Chassis: Constructed from 100 x 50 RSC fully welded with front standing plate and A frame drawbar

Axle/Suspension: Single Avonride 1500kg torsion beam axle and fitted with 200 x 50 auto reverse brakes

Wheels & Tyres: 2 no 185 x 13 x 8 ply radial tyres on 4 stud 5 1/2" pcd hubs

Coupling: Knott 2000kg posibrake over run auto reverse c/w spring assisted handbrake lever, breakaway cable and 40mm ring eye or 50mm ball

Ancillary Equipment: Moulded mudguards, mud flaps, rear support stand, telescopic front jockey wheel, side reflectors, front reflectors, full road lighting c/w 13 pin plug & 7 pin adaptor

Outer bund tank:

  • Cylindrical in section with removable top section for tank access

  • Rear access door fitted with stainless steel hinge and fully lockable

  • Bund contains 110% of inner tank content

  • 4 lifting eyes

  • Fork lift pockets (for use when tank off of chassis only)

Inner Fuel Tank:

  • Constructed from translucent heavy duty polyethylene

  • 2" Filler cap & chain

  • 1" Manual vent valve

  • Pressure relief valve

  • Top mounted 1/2" BSP feed & return points

  • Ball valve in base of tank to pump

  • Bottom outlet valve

  • Pressure relief valve in tank top

Pump:

  • K1 Semi rotary hand pump fitted with 15' of 1" fuel hose c/w trigger nozzle and stowed on bracket

  • Fitted with in-line 'Y' strainer

  • All contained within lockable bund area

  • 12V Pump upgrade available at extra cost

Finish:

  • Primer & 2 top coats - single British Standard (BS) colour

Specifications
Product RefTE
Volume (litres)950
Length (mm)3,555
Width (mm)1,550
Height (mm)1,524
Weight (kg)476
Lead time (working days)7
Delivery Terms

The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

Tanks over 2,500L — articulated lorry, customer offload

These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.

Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.

18-tonne tail-lift HGV

This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.

Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.

HIAB delivery

HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.

Accessories

Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.

Returns Information

Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.

All items must be returned unused. Refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.

How to return an item

  • Complete the form on our returns page with details of your order.
  • Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
  • Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
  • Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.

Start a return request

Video
Downloadable Documents
Need help choosing?

Talk to a specialist.

Sizing, regulations, installation. Our team has been answering these questions since 2011.