PRODUCT REF · 650BSASL
650 Litre Slimline Bunded Oil Tank - Atlas 650BSA
650 Litre Slimline Bunded Oil Tank - Atlas 650BSA
- Diesel
- Gas Oil
- Heating Oil
- HVO
- Bunded
- Slimline
Estimate delivery costs
Your postcode lets us show accurate delivery costs before you add to basket. We use it only to calculate shipping rates — it isn't stored or shared.
Couldn't load pickup availability
Enquire about
Loading form…
Atlas 650BSA 650 Litre Slimline Bunded Oil Tank
Product Overview
The Atlas 650BSA 650 Litre Slimline Bunded Oil Tank is a compact, double-skinned heating oil storage tank designed for domestic and commercial fuel oil applications. With a 650 litre capacity, approximately 143 gallons, the Atlas 650BSA provides a practical storage solution where space is limited.
Its slimline dimensions make it particularly suitable for installations where a conventional wider oil tank may not be appropriate. The tank is manufactured from high-grade polyethylene and features a bunded, tank-within-a-tank construction for secondary containment.
Key Features
- 650 litre storage capacity
- Approximately 143 gallon capacity
- Slimline design
- Bunded double-skin construction
- Tank-within-a-tank design
- High-grade polyethylene construction
- British made
- Corrosion resistant
- High impact strength
- UV stabilised
- CE marked
- Overfill prevention valve
- 4" inspection screw lid
- 2" vent
- 1" BSP bottom outlet
- Lockable manhole cover
- Suitable for domestic and commercial fuel oil storage
Bunded Double-Skin Construction
The Atlas 650BSA features a bunded tank-within-a-tank design.
The inner tank acts as the primary storage vessel, while the outer tank provides secondary containment. In the event of a leak or spill from the inner tank, the outer bund is designed to contain the surplus fuel.
This double-skinned construction provides an additional layer of protection around the stored fuel and is suitable for applications where bunded oil storage is required.
High-Grade Polyethylene Construction
The Atlas 650BSA is manufactured from high-grade polyethylene and is British made. The tank material is corrosion resistant, has high impact strength and is UV stabilised, making it suitable for outdoor oil storage applications.
The manufacturer also states that Atlas tanks are CE marked and comply with the applicable European standards.
Applications
The Atlas 650BSA is designed for domestic and commercial heating oil storage where a compact, bunded tank is required.
Typical applications include:
- Domestic heating oil storage
- Residential properties
- Commercial premises
- Small businesses
- Agricultural properties
- Heating oil installations
- Sites with restricted installation space
Its slimline profile makes it particularly useful where the width available for an oil tank is limited.
Delivery
The Atlas 650BSA is supplied using Fuel Tank Shop's standard kerbside delivery service. This means the tank is delivered to the kerb and is not positioned further into the property.
We recommend not to book any installation or machinery until the tank has been delivered. We will not be responsible for any additional cost occurred with delayed deliveries.
Failed deliveries may result in additional charges.
Collection may be available ex works (Please contact us in regards to this option).
Specifications
| Product Ref | AT |
|---|---|
| Volume (litres) | 650 |
| Length (mm) | 1,260 |
| Width (mm) | 630 |
| Height (mm) | 1,350 |
| Weight (kg) | 90 |
| Lead time (working days) | 7 |
Delivery Terms
DELIVERY IN 5-7 WORKING DAYS
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
What is a bunded tank?
Installation requirements
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
New customer offer
£25
off your first order
Minimum spend £500. One code per customer.
Join our mailing list
We'll email your discount code, plus stock updates and trade offers.
We use your email to send your discount code and marketing emails you've opted into. See our privacy policy for how we handle your data.
You're on the list
Check your inbox — your code is on its way. Add us to your safe senders so it doesn't land in spam.