
FTS650 Slim Bunded Oil Tank
The FTS650BT is a 650 litre bunded oil tank designed for secure storage of heating oil, kerosene, diesel, gas oil, biofuel and compatible HVO. Manufactured from high-grade polyethylene, this British-made tank combines a double-skinned construction with a compact footprint, making it suitable for a wide range of domestic and commercial fuel storage applications.
Key Features
- 650 litre nominal capacity
- Approximately 143 gallon capacity
- Maximum fill capacity of 668 litres
- Brim-fill capacity of 703 litres
- Double-skinned bunded construction
- High-grade polyethylene construction
- British-made FTS tank
- Corrosion resistant
- High impact strength
- UV stabilised
- 4" inner inspection cap
- 2" vent
- 1" BSP bottom outlet
- Lockable manhole cover
- Suitable for kerosene, heating oil, diesel, gas oil, biofuel and compatible HVO
- 10-year tank-only guarantee
Bunded Tank Construction
The FTS650BT uses a double-layered tank-within-a-tank design. The inner tank is the primary fuel storage vessel, while the outer tank provides secondary containment for surplus fuel in the event of a spill or leak.
This bunded construction provides additional containment around the primary storage tank and makes the FTS650BT suitable for applications where bunded oil storage is required.
High-Grade Polyethylene Construction
The FTS650BT is manufactured from high-grade polyethylene and is British made. Fuel Tank Shop states that the tank is corrosion resistant, has high impact strength and is UV stabilised. The manufacturer also states that FTS tanks are CE marked and comply with the latest European standards.
The FTS range datasheet also identifies the tanks as UKCA/CE marked and gives a 10-year tank-only guarantee.
Suitable Applications
The FTS650BT is suitable for a range of domestic and commercial fuel storage applications, including:
- Domestic heating oil storage
- Kerosene storage
- Diesel and gas oil storage
- Agricultural and rural properties
- Commercial fuel oil storage
- Biofuel storage
- Compatible HVO storage
- Heating and fuel storage installations requiring secondary containment
Delivery Information
Standard tank deliveries are kerbside, meaning the tank is delivered to the kerb and is not positioned further on site.
We recommend not to book any installation or machinery until the tank has been delivered. We will not be responsible for any additional cost occurred with delayed deliveries.
Failed deliveries may result in additional charges.
Collection may be available ex works (Please contact us in regards to this option).
Specifications
| Product Ref | FTS |
|---|---|
| Volume (litres) | 650 |
| Length (mm) | 1,300 |
| Width (mm) | 630 |
| Height (mm) | 1,350 |
| Weight (kg) | 85 |
| Footprint (L+W) | 1170 x 605mm |
| Lead time (working days) | 7 |
Delivery Terms
Estimated Leadtime is 2-3 Working Days. (Scottish highland postcodes may experience longer lead times)
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
What is a bunded tank?
Installation requirements
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
