
H2500PDD Bunded Diesel Dispensing Tank
Product Overview
The Deso H2500PDD 2500 Litre Bunded Diesel Dispensing Tank is a compact, above-ground fuel storage and dispensing solution designed for commercial, agricultural, industrial and fleet applications. With a 2,518-litre stated volume and bunded construction, it provides secure on-site storage and convenient dispensing of diesel, gas oil and HVO.
The tank is supplied with a 4-metre delivery hose, automatic shut-off nozzle, 10-micron water and particulate filter, overfill prevention valve and clock-type contents gauge. The H2500PDD is available with 12V, 230V or 110V pump options, while a digital flow meter is available as an optional extra. The tank also carries OFCERT certificate reference 0668021501.
Key Features
- 2,500-litre nominal capacity
- 2,518-litre stated tank volume
- Approx. 550 gallons
- Bunded diesel storage and dispensing tank
- Horizontal design
- Compact footprint
- External pre-galvanised steel support frame
- Suitable for diesel and gas oil
- Suitable for biofuel HVO
- Not suitable for kerosene
- 4-metre delivery hose
- 3/4" hose with automatic shut-off nozzle
- 10-micron water and particulate filter
- Overfill prevention valve
- Clock-type contents gauge
- Lockable lid
- Choice of 12V or 230V
- 72 lpm pump
- Optional digital flow meter
- OFCERT No. 0668021501
- 10-year tank warranty
- Approx. 190 kg empty weight
Bunded Tank Construction
The H2500PDD is a bunded tank incorporating a primary inner storage tank within an outer containment structure.
The inner tank acts as the main fuel storage vessel, while the outer skin provides secondary containment. In the event of a spill or failure of the primary tank, surplus fuel is retained within the outer containment area, helping to reduce the risk of an environmental pollution incident.
Compact Horizontal Design
The H2500PDD uses a horizontal tank configuration supported by an external pre-galvanised steel frame.
The external frame supports both the inner and outer skins and reduces the need for extensive internal ribbing. The framework also provides additional mounting points where grapple hooks can be attached.
The published tank dimensions are 2,300 mm long × 1,250 mm wide × 1,450 mm high, with a stated footprint of 1,980 mm × 1,200 mm.
Diesel, Gas Oil and HVO Storage
The H2500PDD is designed for fuel oil (A2) and gas oil/diesel, including biofuel HVO, within the manufacturer's stated fuel specifications.
Conforms to BS EN 2869, BS EN 590 and BS EN 15940 for the stated fuel applications.
The tank is specifically not suitable for the storage of kerosene. Only fuels compatible with the tank and dispensing equipment should be stored and dispensed through the system.
Choice of Pump Options
The H2500PDD is available with 12V, 230V or 110V pump configurations.
The 12V pump is supplied with crocodile clips, providing an option where a suitable 12V electrical supply is preferred.
The 230V pump is supplied with a 3-pin "Caravan Style" plug and 1.8-metre power cable for connection to a suitable mains supply.
Suitable Applications
The Deso H2500PDD is suitable for a wide range of professional fuel storage and dispensing applications, including:
- Commercial vehicle fleets
- Agricultural machinery
- Farms and agricultural businesses
- Construction plant
- Plant and machinery
- Industrial sites
- Haulage and transport operations
- Plant hire operations
- Diesel-powered equipment
- On-site vehicle refuelling
- Gas oil storage and dispensing
- HVO storage and dispensing
The 2,518-litre stated volume provides a substantial on-site fuel reserve for operations requiring regular refuelling of vehicles and machinery.
Delivery and Offloading
Standard tank delivery is kerbside, meaning the tank is delivered to the kerb rather than being positioned into its final installation location.
HIAB delivery is available by request at additional cost.
Specifications
| Product Ref | DS |
|---|---|
| Volume (litres) | 2,518 |
| Length (mm) | 2,300 |
| Width (mm) | 1,250 |
| Height (mm) | 1,450 |
| Weight (kg) | 190 |
| Footprint (L+W) | 2300mm + 1250mm |
| Lead time (working days) | 5 |
| OFTEC certificate | 0668021501 |
Delivery Terms
IN STOCK - Delivery in 5-7 Working Days (Standard Spec)
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
What is a bunded tank?
Delivery Information
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
