PRODUCT REF · V2350PDD-240V
2350 Litre Bunded Diesel Dispensing Tank - Deso V2350PDD
2350 Litre Bunded Diesel Dispensing Tank - Deso V2350PDD
Estimate delivery costs
Your postcode lets us show accurate delivery costs before you add to basket. We use it only to calculate shipping rates — it isn't stored or shared.
Couldn't load pickup availability
Enquire about
Loading form…
V2350PDD Bunded Diesel Dispenser
Product Overview
The Deso V2350PDD 2350 Litre Bunded Diesel Dispensing Tank is a compact, above-ground fuel storage and dispensing solution designed for commercial, agricultural, industrial and fleet applications. With a 2,326-litre stated volume and bunded construction, it provides secure on-site storage and convenient dispensing of diesel, gas oil and HVO.
The tank is supplied with a 6-metre delivery hose, automatic shut-off nozzle, 10-micron water and particulate filter, overfill prevention valve and clock-type contents gauge. Pump options include 230V, 12V and 110V configurations, while a digital flow meter is available as an optional upgrade. The tank also carries OFCERT certificate reference 0668060211.
Key Features
- 2,350-litre nominal capacity
- 2,326-litre stated tank volume
- Approx. 515 gallons
- Bunded diesel storage and dispensing tank
- Compact above-ground design
- Suitable for diesel and gas oil
- Suitable for biofuel HVO
- Suitable for fuel oil (A2) within the manufacturer's stated specifications
- Not suitable for kerosene
- 6-metre delivery hose
- 3/4" hose with automatic shut-off nozzle
- 10-micron water and particulate filter
- Overfill prevention valve
- Clock-type contents gauge
- Choice of 12V or 230V
- 12V pump supplied with crocodile clips
- 230V pump supplied with 3-pin "Caravan Style" plug and 1.8-metre power cable
- Optional digital flow meter
- OFCERT No. 0668060211
- 1,710 mm tank diameter
- 1,900 mm tank height
- 170 kg empty weight
Bunded Tank Construction
The V2350PDD uses a bunded tank configuration incorporating a primary storage tank within secondary containment.
The inner tank acts as the main fuel storage vessel, while the outer tank provides additional containment. In the event of a spill or failure of the primary tank, surplus fuel is designed to remain within the outer tank, helping to reduce the risk of an environmental pollution incident.
Diesel, Gas Oil and HVO Storage
The V2350PDD is suitable for fuel oil (A2) and gas oil/diesel, including biofuel HVO, within the manufacturer's stated fuel specifications.
The product page references BS EN 2869, BS EN 590 and BS EN 15940 for the stated fuel applications.
The tank is specifically stated as not suitable for kerosene. Only fuels compatible with the tank and dispensing equipment should be stored and dispensed through the system.
Choice of Pump Options
The V2350PDD is available with 230V or 12V pump configurations.
The 12V pump is supplied with crocodile clips, providing an option where a suitable 12V electrical supply is preferred.
The 230V pump is supplied with a 3-pin "Caravan Style" plug and 1.8-metre power cable for connection to a suitable mains electrical supply.
Suitable Applications
The Deso V2350PDD is suitable for a wide range of professional fuel storage and dispensing applications, including:
- Commercial vehicle fleets
- Agricultural machinery
- Farms and agricultural businesses
- Construction plant
- Plant and machinery
- Industrial sites
- Haulage and transport operations
- Plant hire operations
- Diesel-powered equipment
- On-site vehicle refuelling
- Gas oil storage and dispensing
- HVO storage and dispensing
The 2,326-litre stated volume provides a substantial on-site fuel reserve for operations requiring regular refuelling of vehicles and machinery.
Delivery and Offloading
Standard tank delivery is kerbside, meaning the tank is delivered to the kerb rather than being positioned into its final installation location.
HIAB delivery is available by request at additional cost.
Specifications
| Product Ref | DS |
|---|---|
| Volume (litres) | 2,326 |
| Diameter (mm) | 1,710 |
| Height (mm) | 1,900 |
| Weight (kg) | 170 |
| Footprint (L+W) | 1690mm |
| Lead time (working days) | 5 |
Delivery Terms
Delivery in 2 - 3 Working Days (Standard Spec)
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
What is a bunded tank?
Delivery Information
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.
New customer offer
£25
off your first order
Minimum spend £500. One code per customer.
Join our mailing list
We'll email your discount code, plus stock updates and trade offers.
We use your email to send your discount code and marketing emails you've opted into. See our privacy policy for how we handle your data.
You're on the list
Check your inbox — your code is on its way. Add us to your safe senders so it doesn't land in spam.