PRODUCT REF · 1125Litre3000psiRoadPR
1125 Litre 3000psi Pressure Washer EU Highway Bowser
1125 Litre 3000psi Pressure Washer EU Highway Bowser
- Non Potable Water
Estimate delivery costs
Your postcode lets us show accurate delivery costs before you add to basket. We use it only to calculate shipping rates — it isn't stored or shared.
Couldn't load pickup availability
1125 Litre 3000psi Pressure Washer EU Highway Bowser
3000 psi diesel Yanmar pressure washer as it is the favourite amongst the Planthire and construction industries. Fitted onto a robust highway towable trailer, complete with a polyethylene water tank.
Site water bowsers and containers provide portable solutions where no mains water connections are available and are ideal for use in car wash facilities, fields and construction sites.
- Towing Height - (Level) 420mm
- Unladen Weight - 375 Kg
- Laden MAX - 1500 Kg
CHASSIS:
- Constructed from 80 X 80 RSA. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised. 5mm sheet front mounting plate.
AXLE/SUSPENSION:
- Knott-Avonride 1500kg rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. 4 stud 5 1⁄2” pcd hubs
WHEELS AND TYRES:
- 2 no. 175 x 13 x 8 ply tyres.
COUPLING:
- Knott-Avonride 2000kg auto reverse coupling fitted with 40mm eye or 50mm ball, break away cable and spring assisted hand brake lever.
TANK:
- Polyethylene moulded tank elliptical in section, baffled & fitted with a 22”lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps.1 rear tap fitted, 2” bottom drain underneath rear of tank. 2 rear outlets.
PUMP:
- Yanmar electric start L100 10HP engine driving a 200 Bar (3000 psi), 15Lpm piston pump c/w hand lance & 9m of hose stowed on bracket. Fuel consumption approx 1.5L/Hr, running time approx 2.9Hrs
ANCILLARY EQUIPMENT:
- Moulded mudguards, mud flaps, front telescopic jockey wheel, Side reflectors, Front reflectors, rear lighting board c/w 13 pin plug and 7 pin adapter.
FINISH:
- Tank moulded in yellow polyethylene. Chassis galvanised.
Specifications
| Product Ref | TE |
|---|---|
| Volume (litres) | 1,125 |
| Length (mm) | 3,550 |
| Width (mm) | 1,550 |
| Height (mm) | 1,346 |
| Weight (kg) | 375 |
| Lead time (working days) | 14 |
Delivery Terms
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
- No documents available for this product.
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.