- Diesel
- Non Potable Water
- Customer Off Loading
Estimate delivery costs
Your postcode lets us show accurate delivery costs before you add to basket. We use it only to calculate shipping rates — it isn't stored or shared.
Couldn't load pickup availability
1000 Litre (FSSC) Approved IBC (Intermediate Bulk Container) MX-EX1000
IBCS Information
- IBC (TOTE) containers made from strong durable blow moulded HDPE high-density polyethylene.
- UN approved.
Frame:-
- Galvanised mild steel
- Large 'Ticket' identification plate above valve outlet, Large documentation plate on back (opposite side to valve) 4 way entry galvanised mild steel perimeter pallet
- Dimensions 1200 x 1000 x 1160mm
Inner Container:-
- 1000 Litre light duty blowmoulded High Density Polyethylene bottle
- FOODCERT FSSC Approved
Fittings:-
- 50mm integral butterfly valve, inner seal ETFE, with S60 x 6 male thread and screw cap
- 150mm top centre screw cap with TPE seal, pressure vent and rain cap
- UN Certified for packaging groups II & III to a maximum SG of 1.6
- Supplied shrouded and top cap secured with tamper evident sequentially numbered tie
IMPORTANT SAFETY MESSAGE
This IBC IS suitable for flammable or highly flammable liquids
This IBC is rated to 1.6 SG
Delivery
All our IBC tanks are for delivery by customer offload. This entails the customer to acquire the right manpower and/or machinery to help unload the tank/s from the delivery vehicle.
Delivery is made either by a Luton lorry or Artic Lorry. Please inform us at the point of order, if access is restrictive for delivery.
If you require assistance with offloading, we may be able to offer a tail lift (lowers the tank to the ground) or HIAB (lorry with a mounted crane to winch the tank off the delivery vehicle). Please contact us if this is required for delivery.
Specifications
| Product Ref | PE |
|---|---|
| Volume (litres) | 1,000 |
| Length (mm) | 1,000 |
| Width (mm) | 1,200 |
| Height (mm) | 1,125 |
| Weight (kg) | 54 |
| Lead time (working days) | 10 |
Delivery Terms
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside", which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks over 2,500L — articulated lorry, customer offload
These tanks are delivered on an articulated vehicle (approximately 16.5m long × 2.6m wide × 3m high) which has no offloading on board. It is the customer's responsibility to offload the tank, which may require a telehandler or forklift.
Curtain-sided vehicles are also used, so please note that if there are obstacles or overhanging branches on the road to the delivery site, the driver may refuse to drive to the location due to the risk of damaging the vehicle. Please let us know about any obstructions before delivery so we can arrange alternative transport.
18-tonne tail-lift HGV
This vehicle is roughly the size of the largest bin lorries — approximately 8.2m long × 2.6m wide × 4m high, and often curtain-sided. If there are overhanging branches, these vehicles will not attempt the route, so a smaller vehicle should be requested.
Tanks are lowered to the ground but not positioned, as this is a kerbside delivery. If a smaller vehicle is required, email sales@fueltankshop.co.uk quoting your order number and name.
HIAB delivery
HIAB delivery is available but must be requested, and carries an additional cost. Email sales@fueltankshop.co.uk quoting your order number and name, and we'll come back to you with a price.
Accessories
Most accessories are delivered within 1–3 working days. Certain products and postcodes may take longer — check the product page for current information. If you need them sooner we can sometimes offer a next-day service; please contact us to discuss. If an item is out of stock we'll advise the expected lead time, and you're free to cancel for a full refund.
Returns Information
Customers may return items within 14 calendar days, as set out in section 7 of our Terms & Conditions.
All items must be returned unused. Refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so do check you're ordering the correct item — we strongly suggest checking the dimensions carefully before you buy.
How to return an item
- Complete the form on our returns page with details of your order.
- Once your request is approved, we'll issue a Returns Authorisation Number (RAN) along with instructions on how and where to return your order, and any costs involved.
- Please do not return any goods without this authorisation. Goods cannot be accepted without a valid RAN.
- Returns are not accepted at our Minehead office. Please wait until we contact you before returning anything.
Downloadable Documents
Talk to a specialist.
Sizing, regulations, installation. Our team has been answering these questions since 2011.
- Choosing a selection results in a full page refresh.
- Opens in a new window.