Piusi EX50 Fuel Transfer ATEX Pump
Product Ref: F00371000 / F00372020 / F00373000 / F00374020
Home Delivery
United Kingdom mainland delivery from £9.95 ex VAT
Parcel Delivery (Highlands & Islands are charged a higher fee than standard)
You may also need:
Piusi EX50 Fuel Transfer ATEX Pump Downloadable Documents
Piusi EX50 Fuel Transfer ATEX Pump Description
Piusi EX50 Fuel Transfer ATEX Pump
The EX50 ATEX approved 230v or 12v fuel transfer pump, which has taken our product range into the market for flammable liquids. Designed for the mobile and static transfer of petrol, kerosene and diesel in a zone one environment, these ATEX pumps satisfy the European directives for explosion proof equipment. This petrol transfer pump has a sturdy, cast iron body, and thanks to its quality manufacturing has a long life span. Incorporated in the 230 and 12 volt fuel transfer pump body is an integrated bypass valve.
These ATEX pumps are available in mains or low voltage, and are also available as part of a drum kit that comes with drum connector and nozzle holster
Specification:
- Explosion proof kerosene, diesel and petrol transfer pump
- Suitable for AVGAS, AVJET A1, Aspen 2, Aspen 4 & petrol with 15% ethanol blend
- Integrated bypass valve
- Maximum flow rate: 50ltr Per Min
- Duty cycle: 30 min on/ 60 min off
- Anti-noise filter
- Cast iron construction
- ATEX pump certified for Zone 1
- Available in 12v and 230v
- 1" BSP
**PLEASE NOTE: POWER CABLES & CONNECTORS ARE DEPENDENT UPON THE INDIVIDUAL RISK ASSESSMENT FOR THE CONNECTION METHOD BETWEEN THE ATEX PIUSI FUEL PUMP AND POWER SOURCE. THIS PUMP DOES NOT COME WITH POWER CABLES AND END USER MUST SUPPLY THEIR OWN AFTER THE CORRECT ATEX RISK ASSESSMENT HAS BEEN COMPLETED**
Piusi EX50 Fuel Transfer ATEX Pump Specification
- Product Code: CT
- Suitable For Fuel: Petrol, Diesel, Gas Oil
Piusi EX50 Fuel Transfer ATEX Pump Delivery Information
Tanks:
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks Over 2500L – Articulated Lorry – Customer Offload:
These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift. Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.
18 Tonne Tail Lift HGV
This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery. If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.
HIAB Delivery
HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.
Accessories:
Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.
Piusi EX50 Fuel Transfer ATEX Pump Returns Information
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.
View Related Categories
People who bought this also bought...
from £6,373.00 ex VAT
(£7,647.60 inc VAT)