Piusi Bi Pump High Speed Battery Transfer Pump Kit For Diesel & HVO 12V
Product Ref: 12BIKIT
Home Delivery
United Kingdom mainland delivery from FREE ex VAT
Free Parcel Delivery (Highlands & Islands are charged a higher fee than standard)
Piusi Bi Pump High Speed Battery Transfer Pump Kit For Diesel & HVO 12V Downloadable Documents
Piusi Bi Pump High Speed Battery Transfer Pump Kit For Diesel & HVO 12V Description
Piusi Bi Pump High Speed Battery Transfer Pump Kit For Diesel & HVO 12V
This Hytek approved assembled in house Piusi Bi pump high speed pump kit is designed for refuelling larger vehicles, agricultural and plant machinery. Spout diameter 25mm. This pump is suitable for use with diesel, HVO and biodiesel up to B5.
Supplied as a complete dispensing kit, we add the locally supplied hose, manual trigger nozzle, hose ends and sealing tape together with foot valve to help keep the pump primed with an integral strainer to ensure no particles can jam the pump. All assembled and packed in the UK by Hytek. Designed with the user in mind.
This Hytek approved Piusi 12BIKIT is suitable for dispensing diesel, HVO, and biodiesel up to B5, particularly useful when mains power is not available and as a portable dispensing pump kit for filling vehicles on remote sites. A popular choice in the agricultural, construction and plant sectors. Direct drive vane pump, with integrated bypass valve, is simple and easy to operate.
One advantage is that it is supplied with 7m hose as standard, while many other kits come with 4m. When refuelling on site, a 1.5m suction hose is required for your barrel or tank, leaving a 5.5m dispensing hose. When refuelling large vehicles such as tractors and plant vehicles high off the ground, a normal 4m hose becomes a 2.5m dispensing hose that is often too short. This hose is made locally to Hytek in the UK and has a special liner for use with the latest diesels.
Why Buy:
- Supplied as a complete dispensing kit, everything you need is in one box
- Empties a 200 litre barrel in 2.5 minutes
- Ideal to refuel agricultural, plant and construction machinery vehicles on site, as well as trucks
- Cost-effective way to dispense fuel remotely and when no mains power is available
Key Features:
- Suitable with diesel, HVO or biodiesel up to B5
- Dispensing flow rate up to 80 litres per minute
- Maximum run time 30 minutes
- Aluminium manual nozzle with inlet swivel
- Brass foot valve with integral strainer (strainer must be fitted or warranty void)
- Foot mounting plate
- On/off switch
- Bypass valve
- 2m long battery cable and battery croc clips
- 7m delivery and lined suction and delivery hose (most other kits have 4m)
- Suction foot valve and strainer must be fitted or warranty void
- Weatherproof to IP54 for outdoor use
- 1" BSP female parallel ports
- 1 year parts warranty offered as standard
Piusi Bi Pump High Speed Battery Transfer Pump Kit For Diesel & HVO 12V Specification
- Product Code: HY
- Guarantee: 1 Year Guarantee
- Suitable For Fuel: Diesel, HVO
Piusi Bi Pump High Speed Battery Transfer Pump Kit For Diesel & HVO 12V Delivery Information
Tanks:
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks Over 2500L – Articulated Lorry – Customer Offload:
These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift. Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.
18 Tonne Tail Lift HGV
This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery. If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.
HIAB Delivery
HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.
Accessories:
Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.
Piusi Bi Pump High Speed Battery Transfer Pump Kit For Diesel & HVO 12V Returns Information
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.