ZVA Slimline 2 Nozzle For Unleaded Petrol
Product Ref: ZVA.LF2
Home Delivery
United Kingdom mainland delivery from FREE ex VAT
Free Parcel Delivery (Highlands & Islands are charged a higher fee than standard)
ZVA Slimline 2 Nozzle For Unleaded Petrol Downloadable Documents
ZVA Slimline 2 Nozzle For Unleaded Petrol Description
ZVA Slimline 2 Nozzle for Unleaded Petrol
As the most prevalent nozzle on petrol forecourts in Europe and the UK, the ZVA range is the toted as the best refuelling nozzles money can buy. Part of the appeal is in the design, the modular component structure makes the nozzle easy to service and replace, increasing the life cycle of the nozzle and improving the economy.
The nozzle has a max flow rate of up to 55L/min and a 3-position stay open latch for easy fuelling - this can be disabled if necessary for better control over the refuelling operation. The nozzle will also shut off the fuel flow when the tank is full with less drain off, making ZVA the more environmentally friendly option.
The nozzle’s stainless-steel tipped spout protects against wear and tear for long life.
Product Features:
- ATEX certified.
- Automatic shut off valve to prevent overfill.
- Suitable with petrol, kerosene and ethanol to E85
- 1" BSPF swivel inlet
- Approved for resale.
- 3 position stay open latch which may be disabled if required
- For use with electric pumps only
- Max Pressure: 50psi (3.5 bar)
- Nozzle Spout OD: 21mm
- Max Flow Rate: 55lpm (litres per minute)
- 1 year warranty
ZVA Slimline 2 Nozzle For Unleaded Petrol Specification
- Product Code: HY
- Guarantee: 1 Year Guarantee
- Suitable For Fuel: Petrol
ZVA Slimline 2 Nozzle For Unleaded Petrol Delivery Information
Tanks:
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks Over 2500L – Articulated Lorry – Customer Offload:
These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift. Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.
18 Tonne Tail Lift HGV
This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery. If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.
HIAB Delivery
HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.
Accessories:
Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.
ZVA Slimline 2 Nozzle For Unleaded Petrol Returns Information
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.