AdBlue Spring Rewind Stainless Steel 10m Hose Reel

Product Ref: HROS10.16HE1

Home Delivery

United Kingdom mainland delivery from FREE ex VAT

Free Parcel Delivery (Highlands & Islands are charged a higher fee than standard)

check delivery cost

updown
You may also need:

AdBlue Spring Rewind Stainless Steel 10m Hose Reel Downloadable Documents

AdBlue Spring Rewind Stainless Steel 10m Hose Reel Description

AdBlue Spring Rewind Stainless Steel 10m Hose Reel

This stainless steel Hytek Engineered, ATEX-certified spring rewind hose reel has a 10m x 5/8" bore x 1" AdBlue hose assembly fitted to it, including a 1m inlet hose. It is for use in harsh or clean environments.

Features:-

  • 304 stainless steel hose reel for use in harsh or clean environments
  • Spring rewind self-retracting hose reel
  • Fitted with 10m x 16mm bore x 1" of textile braided EPDM statically bonded hose assembly
  • Includes 1m inlet hose male fixed - swivel female end
  • Includes bumper stop, allows you to choose the desired length of the hose to be permanently stored outside the hose reel
  • For use with pumps up to 70 litres per minute (20% flow restriction)
  • The hose drum has stiffening ribs & flanged ends for longer life
  • Max pressure 90psi (6 bar)
  • Main reel hose assembly fitted with 1" male BSPP hose end to screw into the pump nozzle

AdBlue Spring Rewind Stainless Steel 10m Hose Reel Specification

  • Product Code: HY
  • Suitable For Fuel: AdBlue

AdBlue Spring Rewind Stainless Steel 10m Hose Reel Delivery Information

Tanks:

The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

 

Tanks Over 2500L – Articulated Lorry – Customer Offload:

These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

 

18 Tonne Tail Lift HGV

This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

 

HIAB Delivery

HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

 

Accessories:

Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

 

 

AdBlue Spring Rewind Stainless Steel 10m Hose Reel Returns Information

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Fuel Tank Shop return policy now.