ZVA Slimline 2 Automatic Nozzle Standard Speed With Safety Break Swivel & Magnet

Product Ref: ZVA.STD2ESBC

Home Delivery

United Kingdom mainland delivery from FREE ex VAT

Free Parcel Delivery (Highlands & Islands are charged a higher fee than standard)

check delivery cost

ZVA Slimline 2 Automatic Nozzle Standard Speed With Safety Break Swivel & Magnet Description

ZVA Slimline 2 Automatic Nozzle Standard Speed With Safety Break Swivel & Magnet

ZVA boasts the best product life cycle economy on the market. Their nozzles are fully modular in design making them ideal for quick and inexpensive servicing and minor replacements, meaning your forecourt runs as efficiently as possible with minimal delays.

This version has the built-in safety break swivel for added operator security, protecting your operation from accidental damage if a vehicle pulls away when the nozzle is left in the filling position and is supplied with a magnet in the guard, as certain dispensers require a magnet to turn them on/off.

 

The ZVA Slimline 2 Automatic Nozzle automatically shuts off the flow when the vehicle tank and decreases levels of drain-off, unlike other brands in the market. All this makes the ZVA the more environmentally and economically friendly nozzle on the market.

The ZVA features a 3 position stay open trigger latch, which can be disabled if required (must be disabled on retail forecourts & when used with B100). Stainless steel tipped spout for protection against wear and tear for long life. For use with electric pumps only.

Why Buy?

  • ZVA nozzles are used on most retail fuel stations they have fantastic reliability and useability
  • Safety break swivel, protects against accidental damage if a vehicle drives off with the nozzle still in the tank
  • Supplied with a magnet in the guard, as certain dispensers require a magnet to turn them on/off
  • ATEX certified, for use in flammable environments and meets the requirements of DSEAR (Dangerous Substances and Explosive Atmosphere Regulations). 
  • This nozzle copes with up to 80 litres per minute, which is ideal for refuelling cars, vans and trucks
  • Stainless steel tipped nozzle outlet spout tip for longevity
  • Inlet swivel supplied as standard to help prevent premature hose wear
  • A must when dispensing fuel with an electric pump as helps prevent spills with its automatic shut off facility

Key Features:

  • Suitable with diesel, HVO, biodiesel up to B100 & kerosene 
  • Includes a safety break swivel, designed to separate if a vehicle drives off with the nozzle still in the tank
  • Supplied with a magnet in the guard as certain dispensers require a magnet to turn them on/off
  • Stainless steel tipped spout for longer life
  • Standard 80 litres per minute version 
  • Automatically shuts off the flow of fuel when the vehicle tank is full
  • Flow rate 10 - 80 litres per minute
  • Decreases the levels of drain-off after shut off, to minimise spills, unlike other brands in the market
  • 1" BSP female swivel inlet
  • Approved for resale
  • 3 positions stay open latch (must be disabled on retail forecourts & when used with B100)
  • Full range of spares available
  • For use with electric pumps only
  • Max pressure 50psi (3.5 bar)
  • 1 years parts warranty

ZVA Slimline 2 Automatic Nozzle Standard Speed With Safety Break Swivel & Magnet Specification

  • Product Code: HY
  • Guarantee: 1 Year Guarantee
  • Suitable For Fuel: Diesel, Bio Fuel

ZVA Slimline 2 Automatic Nozzle Standard Speed With Safety Break Swivel & Magnet Delivery Information

Tanks:

The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

 

Tanks Over 2500L – Articulated Lorry – Customer Offload:

These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

 

18 Tonne Tail Lift HGV

This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

 

HIAB Delivery

HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

 

Accessories:

Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

 

 

ZVA Slimline 2 Automatic Nozzle Standard Speed With Safety Break Swivel & Magnet Returns Information

Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

All Items must be returned unused, refunds cannot be issued for used or previously installed items.

Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

If you wish to return goods, please complete the form on this page to provide further information.

Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

View Fuel Tank Shop return policy now.

People who bought this also bought...