ZVA 25 High Speed Fuel Pump Nozzle With Safety Break Swivel & Magnet
Product Ref: ZVA.25SBC
Home Delivery
United Kingdom mainland delivery from FREE ex VAT
Free Parcel Delivery (Highlands & Islands are charged a higher fee than standard)
ZVA 25 High Speed Fuel Pump Nozzle With Safety Break Swivel & Magnet Description
ZVA 25 High Speed Fuel Pump Nozzle With Safety Break Swivel & Magnet
ZVA is recognised across the UK and Europe and can be found on most forecourts. This high-speed model, with a max flow rate of up to 140L/min, is perfect for fueling larger vehicles such as trucks, agricultural and plant machinery. This version is supplied with a magnet in the guard as certain dispensers require a magnet to turn them on/off.
This version has the built-in safety break swivel for added operator security, protecting your operation from accidental damage if a vehicle pulls away when the nozzle is left in the filling position.
The nozzle is robustly made to have a long life-cycle, and as such, is equipped with a stainless steel tip to prevent damage from wear and tear.
Supplied with a 3 position stay open trigger latch, which can be disabled if required (must be disabled on retail forecourts & when used with B100). The automatic shut-off prevents overfill and environmentally damaging spills, protecting operations from loss of revenue at the same time. The nozzle comes with a 1 year warranty as standard.
Why Buy?
- ZVA nozzles are used on most retail fuel stations they have fantastic reliability and useability
- Popular choice in the diesel, HVO commercial fuel dispensing sector
- Safety break swivel, protects against accidental damage if a vehicle drives off with the nozzle still in the tank
- Supplied with a magnet in the guard, as certain dispensers require a magnet to turn them on/off
- This nozzle copes with up to 140 litres per minute, which is ideal for vehicles with large fuel tanks, trucks, agricultural and plant machinery.
- ATEX certified, for use in flammable environments and meets the requirements of DSEAR (Dangerous Substances and Explosive Atmosphere Regulations).
- Stainless steel tipped nozzle outlet spout tip for longevity
- Inlet swivel supplied as standard to help prevent premature hose wear
- A must when dispensing fuel with an electric pump as helps prevent spills with its automatic shut off facility
Key Features:
- Suitable with diesel, HVO, biodiesel up to B100 & kerosene
- Includes a safety break swivel, designed to separate if a vehicle drives off with the nozzle still in the tank
- Supplied with a magnet in the guard as certain dispensers require a magnet to turn them on/off
- Stainless steel tipped spout for longer life, spout diameter 31mm
- High speed 140 litres per minute version
- Automatically shuts off the flow of fuel when the vehicle tank is full
- Flow rate 15 - 140 litres per minute
- 1" BSPP female inlet swivel
- Approved for resale
- 3-position stay open latch (must be disabled on retail forecourts & when used with B100)
- For use with electric pumps only
- Max pressure 50psi (3.5 bar)
- 1 years parts warranty
- Full range of spares available
- ATEX certified
- The safety break swivel sheers between 175 ? 265lbs when force is applied
ZVA 25 High Speed Fuel Pump Nozzle With Safety Break Swivel & Magnet Specification
- Product Code: HY
- Guarantee: 1 Year Guarantee
- Suitable For Fuel: Diesel, Bio Fuel
ZVA 25 High Speed Fuel Pump Nozzle With Safety Break Swivel & Magnet Delivery Information
Tanks:
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks Over 2500L – Articulated Lorry – Customer Offload:
These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift. Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.
18 Tonne Tail Lift HGV
This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery. If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.
HIAB Delivery
HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.
Accessories:
Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.
ZVA 25 High Speed Fuel Pump Nozzle With Safety Break Swivel & Magnet Returns Information
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.