Piusi Cube 90 Diesel Transfer Pump
Product Ref: 59200A
Home Delivery
United Kingdom mainland delivery from FREE ex VAT
Free Delivery to Mainland UK - (Postcode exclusions apply to AB, BT, DD, EH, FK, G, GY, HS, IM, IV, JE, KA, KW, KY, ML, PA20+ & PH, PO30+, ZE Please Check With Us)
You may also need:
login to savePiusi Cube 90 Diesel Transfer Pump Downloadable Documents
Piusi Cube 90 data SheetPiusi Cube 90 Diesel Transfer Pump Description
Piusi Cube 90 Diesel Transfer Pump
The Piusi Cube 90 diesel transfer pump has been developed to have a higher flow and is therefore a 90lpm version of the industry renowned Piusi Cube 56 & Cube 70 Fuel Dispensers. Thanks to its quicker dispensing performance, this refuelling pump is designed for filling larger vehicle tanks and therefore, rather than coming with a K33 flow meter, comes with a K44. The K44 is a four digit mechanical flow meter used for refuelling large vehicles, where a four digit amount of fuel is more likely to be dispensed in a single transaction. This Piusi electric fuel transfer pump also comes with an Auto 120 nozzle, due to the pump being too quick for use with the standard Auto 60 or Auto 80 nozzle. This fuel dispenser comes with an in-built nozzle holder with pump start/stop lever, making operating the pump an easy process.
This Italian manufactured Piusi Pump unit, allows fast and safe refuelling of large vehicles, whilst measuring the quantites of fuel being dispensed. Similarly to the Cube 56 and 70, the Cube 90 can be installed on drums with the optional 2” quick coupling, or can be mounted freestanding using a pedestal. A wall support kit is also available in order to fit the Cube 90 refuelling pump onto a wall or side of a tank.
Please note: The Cube 90 has a 30 minute on, 30 minute off duty cycle
- Fully enclosed fuel dispenser
- 230v Diesel Transfer Pump
- Mechanical seal & incorporated bypass valve
- Flow Rate 90ltrs Per Min
- Automatic nozzle & 4m x 3/4' Delivery Hose
- 4 Digit Flow Meter
- Nozzle holder with pump start/stop lever
- Protection grade: IP55 (Internal Motor)
- Various mounting options available
- 30min duty cycle
Please note: Piusi is Italian made and therefore supplied with a 2 pin European plug (Europlug). You will either need to change the plug for a UK 3 pin plug or utilise an adaptor.
Piusi Cube 90 Diesel Transfer Pump Specification
- Product Code: CT
- Suitable For Fuel: Diesel, Gas Oil
Piusi Cube 90 Diesel Transfer Pump Customer Reviews
Piusi Cube 90 Diesel Transfer Pump Delivery Information
Tanks:
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks Over 2500L – Articulated Lorry – Customer Offload:
These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift. Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.
18 Tonne Tail Lift HGV
This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery. If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.
HIAB Delivery
HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.
Accessories:
Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.
Piusi Cube 90 Diesel Transfer Pump Returns Information
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.
People who bought this also bought...
