Cim-Tek High Capacity Filter 70063 - 110lpm

Product Ref: HYD.EL10800

Diesel, Gas Oil, HVO Diesel, Gas Oil, HVO Diesel, Gas Oil, HVO
  • Dimensions: L:279mm
  • Diameter: 127mm
  • Lead time approx. 2 - 3 working days

    Home Delivery

    United Kingdom mainland delivery from £9.95 ex VAT

    Parcel Delivery (Highlands & Islands are charged a higher fee than standard)

    check delivery cost

    updown
    You may also need:
    Cim-Tek Filter Head/Adaptor 800 Series
    Cim-Tek Filter Head/Adaptor 800 Series
    £64.78 ex VAT
    (£77.74 inc VAT)
    UltraGrime PRO XXL+ Multi-use Cleaning Wet Wipes (100 Thick Large Wipes)


    Cim-Tek High Capacity Filter 70063 - 110lpm Description

    Cim-Tek Fuel Filter Element 70063 - Removes water and particles, 110 litres per minute gravity or pump flow

    Longer life elements. Ideal for use on sites where they dispense a lot of fuel, these filters last longer and handle a higher flow rate.

    Ideal for pumps with a flow of 90 - 110 litres per minute

    • 10 micron Cim Tek filter
    • Maximum flow rate of 110 litres Per Min
    • Suitable for diesel
    • Cim-Tek part code: 70063
    • Includes 1 x filter element
    • Not to be used with aviation fuels

    Cim-Tek High Capacity Filter 70063 - 110lpm Specification

    • Product Code: HY
    • Filtration: 10 Micron Particulate and Water
    • Suitable For Fuel: Diesel, Gas Oil, HVO

    Cim-Tek High Capacity Filter 70063 - 110lpm Delivery Information

    Tanks:

    The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

     

    Tanks Over 2500L – Articulated Lorry – Customer Offload:

    These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

     

    18 Tonne Tail Lift HGV

    This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

     

    HIAB Delivery

    HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

     

    Accessories:

    Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

     

     

    Cim-Tek High Capacity Filter 70063 - 110lpm Returns Information

    Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

    All Items must be returned unused, refunds cannot be issued for used or previously installed items.

    Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

    If you wish to return goods, please complete the form on this page to provide further information.

    Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

    Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

    Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

    View Fuel Tank Shop return policy now.