Albion Copper Vented Indirect (Grade 3) 900 x 450 mm

Product Ref: KN900450G3

2 Year Guarantee
  • Volume: 117ltr
  • Dimensions: H:900mm
  • Diameter: 450mm
  • Home Delivery

    United Kingdom mainland delivery from FREE ex VAT

    FREE Standard Cylinder Delivery - Postcode exclusions apply to AB, IV, PH, PA, KW, HS, KA, KY, DD, BT, TR, PO30, GY, JE, IM

    check delivery cost

    Albion Copper Vented Indirect (Grade 3) 900 x 450 mm Downloadable Documents

    Albion Copper Vented Indirect (Grade 3) 900 x 450 mm Description

    Albion Copper Vented Indirect (Grade 3) 900 x 450 mm

    This double feed indirect copper vented hot water storage tank is designed for use in open vented systems.

    It heats the water via a coil heat exchanger connected to a traditional gas, oil or electric boiler. Each unit is also fitted with a 2¼” boss for an electric immersion heater to be fitted as a back up heat source.

    • High performance coil heat exchanger that links to a traditional boiler
    • Fitted with a 2¼” immersion heater boss as standard (immersion heater not supplied)
    • Provides domestic hot water and space heating
    • Part L1B Compliant
    • Available in Grade 3 to suit 10 m working head
    • Manufactured to BS 1566:2002+A1:2011
    • 35mm of environmentally friendly HFO foam lagging for reduced heat loss and minimum environmental impact
    • Double thickness of lagging available on request and can be ordered through our Kwikcyl24 service
    • 2-year guarantee against manufacturing defects
    • Extra tappings and bosses can be fitted dependent on individual requirements
    • Can be fitted with a high recovery coil (Ultracal) or gravity coil to suit various system requirements

    Albion Copper Vented Indirect (Grade 3) 900 x 450 mm Specification

    • Product Code: KAU
    • Guarantee: 2 Year Guarantee

    Albion Copper Vented Indirect (Grade 3) 900 x 450 mm Delivery Information

    Tanks:

    The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page.  Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.

     

    Tanks Over 2500L – Articulated Lorry – Customer Offload:

    These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift.  Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.

     

    18 Tonne Tail Lift HGV

    This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery.  If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.

     

    HIAB Delivery

    HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.

     

    Accessories:

    Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.

     

     

    Albion Copper Vented Indirect (Grade 3) 900 x 450 mm Returns Information

    Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **

    All Items must be returned unused, refunds cannot be issued for used or previously installed items.

    Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).

    If you wish to return goods, please complete the form on this page to provide further information.

    Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.

    Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.

    Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.

    View Fuel Tank Shop return policy now.

    People who bought this also bought...