SpinSecure Versalock Oil Tank Fill Point Lock
Product Ref: FSS750MF-2KEYS
Lead time approx. 2 - 3 working days
Home Delivery
United Kingdom mainland delivery from £9.95 ex VAT
Parcel Delivery (Highlands & Islands are charged a higher fee than standard)
login to saveSpinSecure Versalock Oil Tank Fill Point Lock Description
SpinSecure Versalock Oil Tank Fill Point Lock
Spinsecure Versalock Tank Lock is a fuel tank locking device that will fit to a standard 2' fill point inlet on an oil tank to secure its contents.
** Please ensure that the filling point thread on the tank is 100% clean and free from contaminants, as it will cause the thread to seize and can potentially lock the spin secure into place. **
Its clever design utilises Spin Secure technology in that when the cap is locked it spins freely and is almost impossible to remove.
Most existing locking caps are supplied in two pieces and are often secured in place using low quality padlocks which can easily be removed or broken.
Tank Lock eliminates this problem due to its one piece padlock free design and as a result there are NO torque points for forced entry using crow bars, ensuring your tank contents are as safe and secure as possible.
Male or Female?
If the fill point is protruding then this will be a male thread which is standard on most tanks, however, if the thread is internal and recessed, then that would be a female connection and the cap suitable for female threads will be required. (Not supplied).
Features:
- Does not require a padlock
- Eliminates 'crow-bar' access
- For use on 2' MALE threads (adaptor available for tanks with a 2' FEMALE inlet)
- Machined from a non-ferrous hard Zinc Alloy
- Rubber gasket seal to prevent leaks
- High security numbered lock with over 50,000 combinations
- Complete with 2 keys
- Multiple key configurations available
- Weatherproof 'o'-ring sealed self-closing cover
- Integrated safety thermal relief
- No sealants or adhesive required
- No installation tools required
Optional Extras:
- 2' Tank Locking Cap Adaptor (Adaptor for tanks with a 2' female inlet)
**Please note: Some of the spinsecure locks may have 'Versalock' on them. They are still manufactured by Spinsecure and you will receive a Spinsecure manufactured product**
SpinSecure Versalock Oil Tank Fill Point Lock Specification
- Product Code: CT
SpinSecure Versalock Oil Tank Fill Point Lock Customer Reviews
SpinSecure Versalock Oil Tank Fill Point Lock Delivery Information
Tanks:
The delivery of a tank can be confusing as each manufacturer offers a slightly different service and lead time. Please refer to our Delivery Information page. Standard tank deliveries are "kerbside" which means the tank will be delivered to the kerb only and not positioned further. Should you have specific delivery requirements or restrictions, please contact us to discuss.
Tanks Over 2500L – Articulated Lorry – Customer Offload:
These tanks will be delivered on an articulated vehicle (approximately 16.5m long x 2.6m wide x 3m high) which has no offloading on board, it is the customer's responsibility to offload the tank, which may require a telehandler / forklift. Curtain sided vehicles are also used, so please note that if there are obstacles or hanging branches on the road to the delivery site etc, the driver may refuse to drive the vehicle to the customer's location due to the possibility of damaging the vehicle. Please let us know if there are any obstructions before delivery, so we can arrange alternative transport.
18 Tonne Tail Lift HGV
This vehicle is the size of the largest bin lorries (for comparison) and is approximately 8.2m long x 2.6m wide x 4m high, often curtain sided so please note that if there are hanging branches etc, these vehicles will not attempt to drive down due to the possibility of damaging the vehicle and so it is recommended that a smaller vehicle is requested. Tanks will be lowered to the ground but not positioned as this is a kerbside delivery. If a smaller vehicle is required, please email us at sales@fueltankshop.co.uk quoting your order number and name.
HIAB Delivery
HIAB delivery is available but must be requested and there will be an additional cost for this service. If a HIAB delivery is required, please email us at sales@fueltankshop.co.uk quoting your order number and name, and we will come back to you with a price for this service.
Accessories:
Most accessories will be delivered within 1-3 working days (certain products and postcodes may take longer, please check the product page for update to date information). If you require them quicker, we can on occasions offer a next day service (please contact us to discuss). If the item(s) are out of stock, we will advise you of the expected lead time, and you will of course have the opportunity to cancel with a full refund.
SpinSecure Versalock Oil Tank Fill Point Lock Returns Information
Customers may return items within 14 calendar days (as per our Terms & Conditions) - refer to section 7. **
All Items must be returned unused, refunds cannot be issued for used or previously installed items.
Please be aware that returning a tank can be complicated and expensive, so please check that you are ordering the correct item (we suggest checking the dimensions very carefully).
If you wish to return goods, please complete the form on this page to provide further information.
Once your request is approved, a valid Returns Authorisation Number (RAN) will be issued to initiate the returns process along with information on how & where to return your order along with any costs involved.
Please DO NOT return any goods without this authorisation. Goods cannot be accepted without this.
Returns are not accepted at our Minehead Office, please wait until we contact you before returning any goods.
View Related Categories
You may also like...
.png)
People who bought this also bought...
£45.50 ex VAT
(£54.60 inc VAT)
