3/4' AdBlue Delivery Hose Per Meter Open Ended Black with Blue Stripe
3/4' AdBlue Delivery Hose Open Ended Black with Blue Stripe
This AdBlue Delivery Hose is a high quality solution designed for the dispensing of AdBlue. It is primarily used on manual AdBlue pump installations.
Max Length (m) – 50
Hose ID (mm) – 19
Hose OD (mm) – 28
Max Pressure (bar) – 7
Polyester brain reinforcement
PVC BSS51 inner tube
Temperature...
Drum/IBC Adaptor/Suction Pipe – With Filter
Drum/IBC Adaptor/Suction Pipe – With Filter
The AF2 drum connector and suction tube is a sturdy and solid option for dispensing from drums and IBCs
It consists of a 3 part suction pipe with flexible rubber junctions for easy adaptation to the height of the drum, and comes with a 90° hose tail for direct hose connection
Includes:-
Built in filter,
Venting system,
Non-return...
IBC Fittings For Drums & IBCs
IBC Fittings For Drums & IBCs
Suitable for both drums & IBC’s.
Fully interchangeable with a CDS connector.
Wetted parts: polypropylene, stainless steel & Viton.
Works by twisting the valve open/close without putting any angular pressure on the IBC or drum connection point.
Once connected prevents any contamination getting into the container. Helps prevent spillages.
¾”...
AdBlue Delivery & Suction Hose
AdBlue Delivery & Suction Hose 4m & 6m
This AdBlue hose can be used for either suction or delivery side. Strong and robust hose available in two sizes.
Features:-
19mm Hose Bore
4 or 6 Meters Available
PVC, polyester braided
Suction Or Delivery Use
AdBlue Delivery Hose
AdBlue Delivery Hose
This delivery Hose is designed for use with all AdBlue (or DEF as it is also referred to) electric pump kits and installations.
Features:
Length (m) - Max 25
Hose ID (mm) - 19
Hose OD (mm) - 29
Max Pressure (Bar) - 10
Temperature -16°C to +60°C
* Available per metre or in coils so contact us for further details *
Hose Assemblies For AdBlue Dispensing
Hose Assemblies For AdBlue Dispensing
These HYTEK Engineered hoses are fully tested hose assemblies suitable for dispensing AdBlue.
With Three options available, 4 meters, 6 meters and 10 meters.
Features:-
1" Female BSP Ends
Hose Bore 16mm
Statically bonded
Textile braided
4 and 2 Meter Outlet Hose Kit
4 Meter Outlet Hose Kit
This easy to use 4 meter hose with tap is a quick solution to your AdBlue Dispensing.
Features:
4 Meter Hose
Outlet Tap
Clips
Cemo Battery Charger
Cemo Battery Charger
Battery Charger for CEMO Lithium Batteries
Complete with Crocodile Clips
Charger 100 - 240V Output 14.4V-1A
Suitable for All CEMO Tanks with LiFePO4 Built in Batteries
(aprox 3 hours for full charge)
Loxeal 85-21 Jointing Compound Thread Sealant For AdBlue®/DEF - 250ml
Loxeal 85-21 Jointing Compound Thread Sealant For AdBlue®/DEF - 250ml
Key Features:
Suitable with AdBlue®, diesel & biodiesel up to B30.
Highly resistant to heat, corrosion, vibrations, water, gases, oils & hydrocarbons.
Fast curing, high strength anaerobic adhesive for locking & sealing threads & retaining of cylindrical parts.
Allows larger machining tolerances.
Temperature...
PTFE Sealing Tape (Pack of 10)
PTFE Sealing Tape
Key Features
PTFE Sealing Tape
12mm wide tape with a thickness of 0.075mm
Supplied in 12-meter-long white plastic spools with cover.
Pack of 10 rolls
Suitable for AdBlue®, B100, Diesel, Heating Oil, Kerosene, Oil, Petrol
1 year warranty
**Please note these are only sold in pack of 10 and not singularly**
Piusi AdBlue Delivery Hose
Piusi AdBlue Delivery Hose
Piusi AdBlue dispensing hose available also in coils.
Features:
Abrasion and weather resistant
Max Pressure (Bar) - 10
EPDM inner tube & outer cover
Textile synthetic reinforcement
ID 19 mm / OD 27 mm
Temperature -30°C to +100°C
Tested & approved to EN1360
* Available per metre or in coils so contact us for further details *
Piusi AdBlue Suction Hose
Piusi AdBlue Suction Hose
This Piusi AdBlue Suction hose is a quality solution designed for use with all electric AdBlue (or DEF as it is otherwise known) pump kits and installation
Features:
Hose ID (mm) - 19
Hose OD (mm) - 30
Max Pressure (Bar) - 10
Temperature range -40°C to 100°C
Can be submerged with suitable ends
Embedded steel wire helix
Anti-static & sulphur...
Piusi Automatic AdBlue Hose Reel
Piusi Automatic AdBlue Hose Reel
The Piusi AdBlu Hose Reel through careful design has been constructed to be able to limit pressure loss and facilitate use, even for high flow AdBlue pump applications.
These retractable hose reels designed for mounting onto a wall or inside an AdBlue storage tank
Piusi Empty AdBlue Hose Reel
Max Length hose on reel is 9 meters
Max Pressure (Bar) -...
Piusi AdBlue Suction Tube
Piusi AdBlue Suction Tube
The Piusi AdBlue Rigid Suction Pipe has been developed for AdBlue and is used for dispensing from an IBC or drums.
Piusi IBC Suction Pipe with Plug Head Trisure
Inlet - Trisure 56 x 4 Male
Outlet - CDS / SEC
Length - 1050mm
Material - HDPE / Mixed
Piusi IBC Suction Pipe with Plug Head BSP
Inlet - 2" M BSP
Outlet - CDS / SEC
Length...
Piusi IBC Bottom Outlet Kits
Piusi IBC Bottom Outlet Kits
These Piusi bottom outlet IBC kits for AdBlue, are designed for connecting the bottom outlet of an IBC to the suction side of the pumping system.
There are two options available, first is an external suction hose, which has 1.1m of additional hose after the check valve for connectiong to the pump. The second option is a bottom connection kit which is designed for...
Piusi Rotary AdBlue Hand Pump Kit Hose & Nozzle
Piusi Rotary AdBlue Hand Pump Kit Hose & Nozzle
Full rotary action, self priming robust Piusi hand pump. Smooth operation from rolling grip handle. - Grooved locking system on pump stops the adaptor spinning on the drum.
Features:
4m Hose
1" M BSP Inlet/Outlet
Trisure/Valorex mounting
3 part down tube